# Why Can’t I See All of My Accounts in My Hub?

If an account you connected isn't showing in your Hub, or you can't select it in a report, it usually hasn't been turned on for the source yet, or the source's account list hasn't picked it up. Work through the steps below in order; most missing accounts appear after the first or second step.

## Connected, but No Accounts Were Found

If you just connected a source and Power My Analytics told you that no accounts were found, the sign-in worked, but the platform returned no accounts for the login you used. You may see this in a few places:

- A pop-up message such as "LinkedIn Ads connected as Jane Smith, but no accounts were found. Reconnect with a different account."
- A banner at the top of your Hub saying the source's sub-account was not found and your data won't sync until one is connected
- An email with the subject **Data Source Connected - No Accounts Found**

The name after "connected as" is the platform login that Power My Analytics used. Until that login can see at least one account, the source has nothing to sync, and its status shows **No Accounts**.

To fix it:

1. Check the name after "connected as" (it is also shown as the **Authorized User** at the top of the source's panel on the **Sources** page). Make sure it is the login you meant to use.
2. On the platform, give that login access to the account you want to report on. Each platform has its own minimum role, for example:

    - **LinkedIn Ads:** at least the **Viewer** role on the ad account
    - **LinkedIn Companies:** **Super Admin** on the company page
    - **Reddit Ads:** a direct role on the ad account; ad accounts shared through Reddit partner sharing don't appear (see [No Ad Account Appears After You Connect](https://knowledge.powermyanalytics.com/application/sources/reddit-ads-data-connector-user-guide/#no-ad-account-appears-after-you-connect))

    For other platforms, check the prerequisites in the connector's user guide.
3. Bring the account into your Hub:

    - **If the same login now has access:** on the **Sources** page, click the three-dot menu in the **Actions** column next to the source and select **Refresh accounts**. Then select **Add or remove accounts**, check the account, and click **Save**. If the account still isn't listed, select **Reconnect source** from the same menu and sign in again with the same login.
    - **If you signed in with the wrong login:** sign out of the platform in your browser first. Then click **+ Add new source**, choose the same connector, and sign in with the login that has access. Once the new source shows its accounts, you can remove the empty one with **Remove source**.

> **Note:** If the message says a permission is missing instead (for example, an email with the subject "Action needed: Google Ads permission missing"), see ["Action Needed: Permission Missing" Email or Banner for a Data Source](https://knowledge.powermyanalytics.com/application/troubleshooting/action-needed-permission-missing-email-or-banner/). Check which login connected the source and whether it has access on the platform before you reconnect.

If you didn't get this message, start with Step 1.

## Step 1: Check Edit Synced Accounts

Only accounts that are turned on (synced) in your Hub collect data and appear in your reports, so start here.

1. Go to **Sources** in your [Power My Analytics Hub](https://hub.powermyanalytics.com/).
2. Find the source the account belongs to (for example, your Google Ads or Facebook Ads source).
3. Click the three-dot menu in the **Actions** column and select **Add or remove accounts**. The **Edit Synced Accounts** list opens.
4. Look for the account. You can search the list by account name (any part of the name works). If the account was renamed on the platform, search for its old name too: an account that was turned on before it was renamed can still show its old name in this list.
5. If the account is in the list, check the box next to it and click **Save**.

Once saved, the account begins backfilling, and its data becomes available in your reports and exports.

> **Note:** If you see a **Hub limit reached** message, your Hub Owner has set a limit on the number of accounts for this type of source. Ask your Hub Owner to raise or remove the limit. See [Manage Account Limits in Your Hub](https://knowledge.powermyanalytics.com/application/administration/manage-account-limits-in-your-hub/).

> **Important:** Turning on accounts beyond the number included in your plan can add charges to your bill. See [Billing Basics and Best Practices](https://knowledge.powermyanalytics.com/support/faq/billing-basics-and-best-practices/).

If the account isn't in the list, go to Step 2.

## Step 2: Refresh the Account List

For most sources, your Hub keeps a saved list of the accounts the source can access and updates it every night. If you were given access to the account recently, it may not be in the list yet. You can update the list right away:

1. On the **Sources** page, click the three-dot menu in the **Actions** column next to the source.
2. Select **Refresh accounts** and wait for the **Accounts refreshed** message.
3. Open the three-dot menu again, select **Add or remove accounts**, and look for the account.

> **Note:** **Refresh accounts** appears only for sources that can have more than one account, and you can run it once an hour for each source. For Google Ads and Microsoft Advertising sources with many accounts, the refresh can take a while and may not finish. If it doesn't, the list still updates overnight.

If the account still isn't in the list, go to Step 3.

## Step 3: For Meta Accounts, Allow 24 Hours

If the missing account is a Facebook Ads, Facebook Insights, or Instagram Insights account, Meta can take up to 24 hours to make a newly added or newly shared account available to Power My Analytics. Wait 24 hours, then check **Add or remove accounts** again. If the account still isn't there, continue to Step 4.

For all other platforms, go straight to Step 4.

## Step 4: Check Your Permissions on the Platform

A source can only list the accounts that the login used to connect it can access on the platform.

1. On the **Sources** page, click the source to open its panel. The **Authorized User** at the top of the panel is the login that connected the source.
2. On the platform (for example, Google Ads or LinkedIn Campaign Manager), confirm that this user has access to the missing account.
3. If the user doesn't have access, ask the account's owner or administrator on the platform to grant it. Then run **Refresh accounts** again (Step 2).

**Facebook and Instagram:** if the login has access and the account still isn't listed, check that Facebook shares the business, Page, or Instagram account with Power My Analytics. In your [Facebook business integrations settings](https://www.facebook.com/settings?tab=business_tools&ref=settings), find Power My Analytics and click **View and Edit**. If the account isn't shared, remove the app, then select **Reconnect source** from the source's three-dot menu, sign in, and opt in to all current and future Businesses, Pages, and Instagram accounts when Facebook asks. Reconnecting doesn't affect your existing reports.

## Step 5: Submit a Ticket

If the login has access to the account on the platform and the account still doesn't appear, [submit a ticket](https://knowledge.powermyanalytics.com/support/submit-a-ticket/) and include:

- The platform (for example, Google Ads or TikTok Ads)
- The email address of the **Authorized User** that connected the source
- The name and ID of the missing account
- The steps you've already tried

## Related Articles

- [Refresh the Account List for a Data Source](https://knowledge.powermyanalytics.com/application/sources/refresh-the-account-list-for-a-data-source/)
- [Add and Remove Accounts from Data Sources](https://knowledge.powermyanalytics.com/application/sources/add-and-remove-accounts-from-data-sources/)
- [Manage and Configure Data Sources](https://knowledge.powermyanalytics.com/application/sources/manage-and-configure-data-sources/)
- [Understanding Data Source Statuses](https://knowledge.powermyanalytics.com/application/sources/understanding-data-source-statuses/)
